4/19/2024 6:44 AM | |
Joined: 2/8/2024 Last visit: 4/20/2024 Posts: 2 Rating: (0) |
Hi experts, my problem is related to an IPC847D.After installing SoftPlc 1507s on my IPC 847D and setting up TIA V19, I configured both the IPC and the Soft PLC in the hardware configuration. However, upon turning on the PLC, it consistently shows a FAULT mode. Despite attempting to format the PLC, the issue persists. Additionally, while attempting to download the configuration into the PLC, I encountered the error shown in the attached snapshot. ------------------------------------------------------------------------------------------ |
Last edited by: Akhil Akiee at: 04/19/2024 06:50:50Last edited by: Jen_Moderator at: 04/19/2024 11:33:56New subject after splitting |
|
4/19/2024 12:18 PM | |
Joined: 5/12/2006 Last visit: 5/2/2024 Posts: 22243 Rating: (2981)
|
can it be that you must first load the station and after that the PLC? have you try this? |
Follow us on