Select Software SITOP solar select

For optimal design of photovoltaic generators and inverters

You can use the SITOP solar select design programme to help select the best possible configuration for your photovoltaic equipment. This automated programme has been designed as Windows application and is available for download at no cost.

The programme calculates all suitable configuration data capabilities for SITOP solar inverters with the photovoltaic modules of your choice. The module allows you to find out details of all currently available on the market. Calculations are based on real measured values of irradiation in minute resolution.

This allows you to make a targeted observation of the overload behaviour, an authentic determination of the inverter's annual efficiency and an optimal adaptation to irradiation conditions in particular areas.

SITOP solar select calculates the performance ratio for every equipment configuration and compares energy creation costs as a percentage use/cost factor. Diagrams are used to visualise the sequence of transmission losses depending on global radiation and to show their utilisation.

This clear summarised representation of results allows you to make a simple assessment for the optimum configuration of your photovoltaic equipment.

System requirements
Hardware:	Pentium II with 300 MHz or better, 128 MB RAM, min 12 MB free hard disk memory
Operating system:	Microsoft WINDOWS 9X/ ME/ NT/ 2000/ XP
Important:	You must have .NET Framework 1.1 installed on your computer!