|
|
Software Version 3
for SITOP DC UPS with serial and USB interface,
incl. the new SITOP UPS500
| The DC UPS modules are available with an interface
with which all relevant information on the state of the system can be read.
Further
processing is supported by a software tool for operating systems Win2000, XP and Vista.
Further information you find in the user instructions. |
|
 |
Conditions:
This
Software is Freeware. It is distributed for free. You may copy and
use it for free as well as distribute it to others. You may only
distribute it as a whole, unmodified and with all trademarks and
copyright notices. You may not distribute it commercially (e.g. as a
Share-/Freeware-Distributor) without the express written permission
of Siemens Aktiengesellschaft. Since this SOFTWARE is
distributed for free, it is provided "as is" without any
representation or warranty of any kind either expressed or implied
including but not limited to implied warranties for merchantibility
or fitness for use. Any use of the Application example is on your
own risk and responsibility. If you happen to find any faults
in it please tell us.
|
|
|
All about Power supply SITOP
|
|
Pre sales info
