| For controlling rapid traverse/creep speed drives The
FM 351 is a module for adjusting and positioning mechanical axes based on
the rapid traverse/creep speed principle. With this module, two axes can be
positioned independently of one another. The axes to be positioned may be
linear axes with limited traversing range and continuously rotating rotary
axes.
Incremental encoders and SSI encoders can be used for position decoding. The
FM 351 is used in the SIMATIC S7-300, C7 and in the ET 200M on S7-masters as
well as with WinAC Basis and WinAC Slot 41x. |
 |
Types of encoders and cables 
Pre sales info