MICROMASTER 411 and COMBIMASTER 411 – Standard

Variable-speed Drives for Decentralised Tasks

The MICROMASTER 411/COMBIMASTER 411 products are ideally suited to decentralized drive applications which have the requirement for high IP protection rating. The modular design of the MICROMASTER 411/COMBIMASTER 411 allow the user to select the product components individually, including options. All the modules, starting from the series of basic units, are easy to install and wire up. Various communication modules are available, such as the PROFIBUS and AS-Interface module. Braking functions are implemented by the EM module (electromechanical brake control module) and an REM module (resistor brake and electromechanical brake control module).

Typical Uses

It has been designed for use in a broad range of drive applications from simple individual pump or fan applications up to multiple drive conveyor applications incorporating networked control systems.

The Technology at a Glance

Voltage and power ranges	380 V-480 V, ±10 %, 3 AC, 0.37 kW-3.0 kW
Operating temperature	-10 °C bis +40 °C
Process control	Internal PI controller
Types of control	FCC (Flux Current Control), multipoint characteristic (parameterisable V/f characteristic), V/f characteristic
Inputs	3 digital inputs, 1 analog input
Outputs	1 relay output
Link-up to automation	The ideal partner for your automation tasks; completely integrated into Totally Integrated Automation with PROFIBUS interface

Its Strengths in Brief

Available for mounting near the motor or as COMBIMASTER 411

Requires less space due to compact space-saving design

Simple assembly, installation, and maintenance

Easily extendable due to modular design

Motor and inverter are perfectly matched

Improved electromagnetic compatibility due to removal of cables

Rugged housing with high degree of protection (inverter: IP 66; motor: IP 55; IP 56/IP 65 to order); suitable for corrosive environments (epoxy resin powder coating)

Comprehensive basic features

Serial RS 232 interface

Flying start and slip compensation functionality

Automatic restart after power failure or fault

Parameterisable ramp-up/ramp-down time from 0.01 to 240 s with multi-point smoothing

COMPOUND-braking for controlled fast braking

Electromechanical brake control (EM brake)

Integrated braking resistor with electromechanical brake control (REM brake)

Four skip frequencies

With PROFIBUS module, complete integration into Totally Integrated Automation (TIA) is possible

AS-Interface communication module available

	Standard - Low-Voltage Inverters - Siemens \| 12/05/2008 1:59 AM

	Hide Images \| Print