SINAMICS G120 Chassis Units

The Modular Single Drive for Small and Medium Output Ranges

SINAMICS G120 is a modular drive inverter system that comprises various function units. These are essentially:

Control Unit (CU)

Power Module (PM)

The CU controls and monitors the PM and the connected motor in several operating modes that can be selected. It supports communications to a local control as well as to monitoring devices and equipment. The PMs has a power range from 0.37 kW to 90 kW.

SINAMICS G120 – a Brief Summary of its Strengths

With many innovative functions
Safety Integrated for safety-relevant machines and systems, capable of regenerative feedback into the line supply for energy saving and a new cooling concept

Faster engineering, fast commissioning
using the SIZER and STARTER tools and data backup using the Basic Operator Panel (BOP) and MMC card

Efficient and consistent solutions
via Totally Integrated Automation (TIA), consistency from SINAMICS through to the automation level

SINAMICS G120 – Technical Data

Voltage and power ranges	380 – 690 V ± 10% 3AC, 0.37 to 90 kW
Types of control	Vector control, FCC (Flux Current Control), multipoint characteristic (parameterizable V/f characteristic), V/f characteristic
Inputs / Outputs	up to 9 digital inputs, 2 analog inputs / 3 digital outputs, 2 analog outputs

SINAMICS G120 – Typical Uses

SINAMICS G120 is especially suitable as universal drive in the whole of industry and the trades, in sectors such as automobile, textiles, printing, chemical as well as in general higher-level applications – e.g. in conveyor systems.

	SINAMICS G120 - SINAMICS G120 - Siemens \| 12/03/2008 11:28 PM

	Hide Images \| Print