System interfacing PG/PC/Software - PROFINET - Siemens  |   12/02/2008 10:12 PM  
Hide Images  |  Print

System connection for PG/PC/software

To be able to utilize the advantages of a PC in industrial communication, for example visualization or IT services, there are communication modules and software available for connection of the PG/PC to PROFINET.
CP 1616 - hardware-supported preprocessing by ASIC ERTEC 400
The CP1616 PCI module is ideally suited for connection of PC-based applications with any operating systems to PROFINET IO. Thanks to the hardware-supported preprocessing in the ERTEC 400, an excellent performance is achieved. The integrated 4-port real-time switch results in decisive cost advantages and permits the implementation of line topologies commonly used on the field level.
 
CP 1604: CP with separate microprocessor and
 real-time functionality in PC/104 Plus format
The PC/104-plus card with integrated ASIC ERTEC 400 and 4-port real-time switch permits the connection of PC/104-based systems to PROFINET.
 
SOFTNET PN IO - low-cost software solution for PROFINET IO
With SOFTNET PN IO the user can cost-effectively connect field devices direct to PROFINET IO under Windows operating systems.
 
PN CBA OPC server - application interfaces for PROFINET CBA components
The PN CBA OPC server is the PC application interface for communication over Industrial Ethernet with PROFINET CBA components for distributed automation structures.
 
Siemens AG 2008