The low-cost version:
CP 343-1 Lean communications processor
The CP 343-1 Lean with the tried and tested communications services is used to connect the SIMATIC S7-300 to Industrial Ethernet And it does this in single-width design.
Tried and tested communication
PROFINET IO device functionality
| Product image |
 |
 |
The new CP 343-1 Lean (CX10) has an integrated 2-port switch (ERTEC 200) and thus PROFINET IO device functionality. It permits connection of the S7-300 to Industrial Ethernet and PROFINET IO via these 2 ports.
Sophisticated retaining collar concept
| Product image |
|
 |
Secure data communication by means of industry-standard device interface using the plug-in connector IE FC RJ45 Plug 180 and additional strain relief by latching the connector to the housing.
Free slot selection
| Product image |
|
 |
The CP 343-1 Lean can be used for a range of different applications. Thanks to its single-width design, plenty of space remains for other function modules.
Web diagnostics
| Product image |
|
 |
With web diagnostics, the CP V2.0 or higher permits you to call the most important settings of a connected station as well as the states of its network connections and communication partners from an HTTP client onto a programming device/PC. Furthermore, you can poll the diagnostics buffer entries of the modules of the rack where the CP is connected.
Web diagnostics allows read-only access to the data of the connected stations.
Hide Images |
Print
