CP 5614 A2

The CP 5614 A2 is a PCI card (Universal Key 5V/3.3V) with microprocessor that enables a SIMATIC PG/PC and PCs with PCI slot to be connected to PROFIBUS up to 12 Mbit/s. The CP can be either a DP master or a DP slave.
Two different PROFIBUS networks can then be connected in a hierarchic structure to a PC with a PROFIBUS card and data can be transferred between the two. With the CP 5614 A2 high-performance control tasks are supported on the PC.

• Communication services:
  • PROFIBUS DP master and slave interface according to IEC 61158/ EN 50170 on a PCI card
  • PG/OP communication with STEP 5 and STEP 7
  • S7 Communication
  • S5-compatible communication (SEND/RECEIVE) based on the FDL interface
  • PROFIBUS FMS acc. to IEC 61158/EN 50170
• Comprehensive diagnostics optionss for installation, start-up and operation of the module
• High performance over direct dual-port RAM access
• Event and filter mechanisms to reduce the loading on the host CPU
• Multi-protocol mode and parallel operation of up to 4 CPs
• Implementation of Motion Control applications is possible because a constant bus cycle time is supported
• The appropriate OPC server and configuration tools are included in the scope of supply of the respective communication software