Industrial Ethernet CP 1623

Integral microprocessor executes the protocol stack autonomously. ISO and TCP/IP transport protocol on board. Communication services via PG/OP Communication, S7 Communication or S5-compatible Communication (SEND/RECEIVE).

Use in modern PCs with x1 slots. Flexible use because slots are upwards-compatible, that is, no matter what slot is available (e.g. x4, x8, etc.), the CP will fit.

The integral 2-port switch enables simple establishment of linear bus structures and thus the integration of other PCs/network components without additional hardware.

The two electrical ports with RJ45 standard connectionsare suitable for data transfer rates from 10/100 Mbit/s up to 1000 Mbit/s.

An optional external voltage infeed enables switch mode even when the PC is switched off. This option is particularly important for use in linear bus topologies to avoid the failure of entire network segments.

It is possible to communicate with the fault-tolerant S7-400H system in conjunction with the S7-REDCONNECT software. Fault-tolerant S7 Communication is carried out via a standard connection and a standby connection. These are monitored during operation and switched in the event of a fault. With S7-REDCONNECT, these are invisible to the PC application. Fault detection, changeover (if required), communication monitoring, and synchronization are all invisible to the application.

Automatic time-of-day synchronization of the PC via the network.

Simple connection of, say, office applications to the communication system via OPC.

You can apply your know-how universally thanks to the uniform configuring functionality in the case of NCM PC and STEP 7.