Micro Automation Set 11:
Simplest possible access to PLC data via standard PC applications

Reading and writing of SIMATIC S7-200 data with standard Windows applications using the example of MS Excel

The PC software enables data transfer between PC/PG and the S7-200 CPU. Process data can be swapped out, backed up in the long term, and written to the controller, with Excel, for example.

Highlights

• Low-cost and modern processing and visualization of data or variables.
• Programming-free access to SIMATIC S7-200 data using supplied MS Excel add-in.
• All data types supported by SIMATIC S7-200 can be used.
• All SIMATIC S7-200 connection options are supported, e.g. modem, GSM modem, MPI, PPI and Ethernet.
• Symbols can be imported direct into a SIMATIC S7-200 PC Access project from STEP 7 Micro/WIN.
• Access to several SIMATIC S7-200 CPUs is possible in conjunction with Multimaster cable.

Micro Application Example with Startup Code The Micro Application Examples (MAE) show you what a concrete application can look like.  more

Simplified diagram Overlook about the combination of the individual components. Simplified diagram

Order data (Mall) ... ... for your planning.  more

Product overview All what you need. Planning tool

Further Information

Flyer MAS 11 "Simplest possible access to PLC data via standard PC applications“ SIMATIC S7-200 and PC Access Discuss also to this topic in technical forum