Functions for operator and machine protection

Short response times due to integration into the drive system

Suitable for all modes of operation

Replaces external electromechanical devices

Safe stopping process
Safely transfers the drives from motion to standstill as soon as a monitoring function or a sensor (e.g. a light barrier) responds.

Safe operation stop (SBH)
This safety function monitors the drives for standstill. The drives are fully functional in the bearing.

Safe standstill (SH)
Pulse suppression of the drives and safe, electronic interruption of power supply

Safely reduced speed (SG)
Monitoring of configurable speed limits, e.g. upon setup without pressing an enable key.

Safe software limit switches (SE)
Variable traversing range limits

Safe software cams (SN)
Area recognition

Safety-relevant input/output signals (SGE/SGA)
Process interface

Safe programmable logic (SPL)
Direct connection of all safety-relevant signals and their internal logic combination.

Safe brake management (SBM)
Two-channel brake control and cyclic brake test

Safety-relevant communication via standard bus
Connection of distributed I/Os for process and safety signals via PROFIBUS with PROFIsafe

Safe network transition between ASI and PROFIBUS
The DP/AS-I F-Link provides for a safe transition from ASIsafe to PROFIsafe. All safety-related signals are collected via the AS-i bus.

Integrated acceptance test
Partially automated acceptance test for all safety-relevant functions. Convenient operation of the test sequence, automatic configuration of trace functions and automatic generation of the acceptance certificate

High safety:
Contiguous realization of Class 3 / SIL 2 safety functions (EN 954-1)

High flexibility:
Practice-oriented safety and operating concepts can be realized

High cost effectiveness:
Reduction of hardware and installation costs

High availability:
Electromechanically operated contact mechanisms susceptible to interference are no longer required