SIMOTICS N-compact High-Speed

Simple, cost-effective, reliable

Overview

General description
Technical data overview
Customer benefits
Typical applications

General description

SIMOTICS N-compact High-Speed is based on the SIMOTICS N-compact series of motors and has a speed range that extends all the way up to 5000 rpm. Our experts didn‘t leave anything to chance in order to achieve this high speed:
They developed a special rotor design and the motor is decoupled from the foundation using antivibration damping elements. And last but not least – all of the motor components were carefully selected to ensure that they can handle the high speeds.
The result is quite convincing:
Using our innovative motor, not even high-speed machines – such as highpressure fans, screw compressors and special centrifugal pumps – require a gear unit. This means that the complete unit requires fewer drive components. This saves space and weight, further increases the reliability and efficiency and at the same time again reduces the amount of maintenance required.

top of page

Technical data overview

Brief overview
Power range:	200 kW - 1050 kW
Torque range:	380 - 2380 Nm
Rated voltage:	400 V to 690 V
Shaft heights:	315, 355, 400, 450 mm (plus the anti-vibration damping elements)
No. of poles:	2-pole
Rated speed:	Up to 5000 rpm
Torque characteristics:	All
Degree of protection:	IP55
Type of construction:	IM B3
Cooling type:	Force-ventilated (IC 416)
Standards:	IEC, EN, DIN, VDE
Operation:	Can only be fed from a drive converter
Accessories:	Can be individually adapted to customer requirements using options

top of page

Customer benefits

Rugged, space-saving and efficient basic motor concept
Sub-critical rotor design and forced ventilation allow the full speed control range to be used
Can be used in direct drive systems
- higher system efficiency – optimized to the operating range
- increased level of security against failure
- lower engineering, mounting and maintenance costs
- lower space requirement
Lower foundation costs by using anti-vibration elements with high damping characteristics
The rotor can be balanced while still mounted in the motor
Harmonized system together with SINAMICS drive converters

top of page