Technical Forum

Suggestions - Feedback

Things which should be fixed in Forum.

Thread Starter: UMENCHO Started: 5/1/2011 6:39 PM Replies: 80

5/1/2011, 6:39 PM

UMENCHO

Joined 3/21/2006

Last visit: 5/14/2013

Posts: 9063

Rating:

Rated: Outstanding [3.78 out of 5 / rated 820 time(s)].

(820)

Rated: no ratings [0 out of 5 / rated 0 time(s)].

(0)

Dear Members,

Let's make this thread for the all the strange things which everybody of us met here in order Moderators of forum to fix it. Rnf:lblSmileyTooltip_

Just saw it. look at attachment.

Attachment:

tesyt.JPG (97 Downloads)

Top

5/3/2011, 9:13 AM

O_Moderator

Joined 4/24/2009

Last visit: 5/19/2013

Posts: 1948

Rating:

Rated: Outstanding [3.89 out of 5 / rated 100 time(s)].

(100)

(0)

Hello UMENCHO,
this is a known problem, and already forwarded to the developement of the forum.
But i don´t know when this problem will be fixed, because they have got a great deal of work with some "other things" Rnf:lblSmileyTooltip_

.

Best regards
O_Moderator

Top

Thank you for this post from:

UMENCHO

5/3/2011, 10:59 AM

hdhosseini

Joined 1/28/2009

Last visit: 5/19/2013

Posts: 2857

Rating:

Rated: Excellent [4.1 out of 5 / rated 394 time(s)].

(394)

(0)

Hi

I have encountered several errors while working in forum as
you can see in attachment the most frequent cases.But I
accept the fact that technical difficulties are inevitable in a
big project like this (More than 90000 participant) and also
I have learnt to be patient. Rnf:lblSmileyTooltip_

Regards

Attachment:

errors.zip (40 Downloads)

Human beings are members of a whole , In creation of one essence and soul
Sa'adi

Top

5/3/2011, 7:14 PM

UMENCHO

Joined 3/21/2006

Last visit: 5/14/2013

Posts: 9063

Rating:

(820)

(0)

Hello hdhosseini,

Allow me to give you an answer for both "errors".
1. This "error" is happens during maintenance of forum basically during the weekend.
2. "Data Provider Error" - very common 'error' in to the past. Now situation is better after Moderators of this forum taken some improvements. Frankly speaking, I also have this error trying to open Communication Conference, here logged like UMENCHO. My suggestion is to contact personally with Moderators in order to clarify when, why and where is happens this behavior with receiving this message.

Best regards,
Hristo Mihalev

Top

Thank you for this post from:

hdhosseini

5/4/2011, 2:33 PM

Marcjan

Joined 4/22/2010

Last visit: 5/19/2013

Posts: 3190

Rating:

Rated: Excellent [4.11 out of 5 / rated 295 time(s)].

(295)

(0)

Hello all,

Just noticed a strange thing, in the section S7/ S7300 was a topic Cycletime listed, clicking on that results in message, permission denied.
In the 300 section itself there was no trace of that topic.

See picture.

Best regards,

Marcjan

Attachment:

fault.JPG (34 Downloads)

=== Edited by Marcjan @ 5/4/2011 2:41 PM [GMT ] ===

Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!

Top

5/5/2011, 1:24 PM

CS Moderator

Joined 9/1/2005

Last visit: 5/19/2013

Posts: 1860

Rating:

Rated: Outstanding [4 out of 5 / rated 99 time(s)].

(99)

(0)

Hello Marcjan,

I'm sorry to say, that I don't understand your message I think.

You have seen a thread with the word "Cycletime" within the conference SIMATIC S7-300 / S7-300F . Trying to open this thread and get no access?

I tought maybe the thread was deleted by the author while you tried to open it. But I couldn't find one within the deleted posts too

Please try to explain it in simple words. I'm only a moderator

Best regards
CS Moderator

Informieren Sie sich jetzt: Der neue Industry Online Support
Get new information now: The new Industry Online Support

Top

Thank you for this post from:

hdhosseini

5/5/2011, 2:19 PM

Marcjan

Joined 4/22/2010

Last visit: 5/19/2013

Posts: 3190

Rating:

(295)

(0)

Hello Moderator,

I have attached the problem with screenshots, hope it's clear now.

Best regards,

Marcjan

Attachment:

fault.pdf (21 Downloads)

Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!

Top

5/5/2011, 2:30 PM

CS Moderator

Joined 9/1/2005

Last visit: 5/19/2013

Posts: 1860

Rating:

(99)

(0)

Hello Marcjan,

ok, now I found the thread within the deleted posts. So the reason why you didn't got access ist clear.

So, there are two variant:

You saw the thread, try to access meanwhile it was deleted
Deleting a thread should delete the entry with the list with the actual thread within the S7-Conference. I'm going to check wether this is working or not.

Best regards
CS Moderator

Informieren Sie sich jetzt: Der neue Industry Online Support
Get new information now: The new Industry Online Support

Top

Thank you for this post from:

Marcjan

5/19/2011, 6:26 PM

Vithani

Joined 7/8/2009

Last visit: 5/17/2013

Posts: 1167

Rating:

Rated: Excellent [4.25 out of 5 / rated 326 time(s)].

(326)

(0)

One more problem I am facing recently is regarding Quote..

So many time I faced that If I am trying to Quote someone's Post, my reply is also coming in that BOX. I double checked that

is written before I start my reply but its still coming in to that Grey Box..

And also note that I tried in IE as well as Fire Fox and problem remains same for both..

I hope you understand what I tried to explain

Regards,
Devesh Vithani

Please say Thanks if your Problem is Solved.. :-)

Top

5/19/2011, 6:46 PM

O_Moderator

Joined 4/24/2009

Last visit: 5/19/2013

Posts: 1948

Rating:

(100)

(0)

Have you tried it like this?
[wuote user="Here write name of user you want to quote"]
Here you can write what you want to quote [/wuote]
The w has to be a q blush

Top

Actions

Copy Link

To conference