Technical Forum

DC converters SIMOREG

Experts of this conference

Topics

Thread	Last post	Replies	Views	Rating
Simoreg 6RA2485-6DV62-0 Armature I Leakage? by: nfirmin	by: nfirmin 11/22/2010, 11:15 AM	3	1,312	(0)
retrofitting extruder from 6RA22 to 6RA70 by: naga	by: naga 11/20/2010, 2:45 PM	4	1,756	(0)
What is difference of C98043-A7001-L1 and C98043-A7001-L2 ? by: DA_SaM	by: KSN 11/19/2010, 8:02 AM	5	3,232	(0)
How to find the Voltage of drive ,help of Specification by: ŠΜS	by: KSN 11/18/2010, 4:36 PM	1	1,067	(0)
6ra70 dc simoreg drive by: eshwar	by: ŠΜS 11/18/2010, 3:01 AM	3	2,276	(0)
Is there any input required for activate OFF3 command ? by: ŠΜS	by: KSN 11/14/2010, 11:30 AM	1	1,266	(0)
Regenerative drive by: eshwar	by: twhgarnett 11/13/2010, 6:37 AM	2	1,575	(0)
should i do any input command to be given to drive for fast st... by: eshwar	by: ŠΜS 11/11/2010, 9:41 AM	1	1,097	(0)
PLEASE HELP IN 6ra70 setting parameters by: eshwar	by: ŠΜS 11/7/2010, 2:16 PM	1	1,167	(0)
New to 6ra70 dc drive commissioning can you please help me by: eshwar	by: ŠΜS 11/7/2010, 2:01 PM	4	1,807	(0)
6RA70 DC DRIVE drive healthy relay by: eshwar	by: KSN 11/7/2010, 12:12 PM	1	1,076	(0)
Quick motor braking in reverse direction with 4Q dc drive by: eshwar	by: KSN 11/7/2010, 12:01 PM	1	1,210	(0)
incomming fuse selection by: ŠΜS	by: PISCEAN 2010 11/4/2010, 5:55 AM	1	1,384	(0)
6RA70 interface cable by: naga	by: UMENCHO 11/3/2010, 5:39 PM	1	1,367	(0)
uploading parameters of 6RA22 by: naga	by: UMENCHO 11/2/2010, 5:39 PM	1	968	(0)
6RA70 - OPTIMISATION RUN by: eshwar	by: UMENCHO 11/2/2010, 12:14 PM	2	1,136	(0)
Simoreg 6RA70 F048 fault by: Goran_	by: KSN 11/2/2010, 12:12 PM	13	3,685	(3)
Working in "torque" mode by: Goran_	by: Goran_ 10/31/2010, 12:21 AM	-	847	(0)
How to select Dc Fuse , according to motor Spec by: ŠΜS	by: PISCEAN 2010 10/28/2010, 7:16 AM	3	2,490	(0)
What may the voltage for RPM meter in reverse direction. by: ŠΜS	by: KSN 10/27/2010, 7:07 AM	3	1,522	(1)
10K Ohms for 6RA70 DC Drive by: ŠΜS	by: Thusg8x@ 10/25/2010, 7:33 AM	3	1,964	(0)
Saftey parameters in 6RA70 by: ŠΜS	by: KSN 10/25/2010, 6:17 AM	3	1,501	(0)
Can not run a high load by: memo201105	by: PISCEAN 2010 10/22/2010, 1:08 PM	3	1,487	(0)
motor field always under voltage by: kthioune	by: PISCEAN 2010 10/15/2010, 9:26 AM	1	1,302	(1)
How to determine proper excitation (field) current for DC motor? by: uel123	by: PISCEAN 2010 10/15/2010, 9:15 AM	1	2,528	(0)