 |
| On-site measurements with a specially equipped
vehicle |
| We carry out on-site measurements with our EMC vehicle (e.g. on
complex machine tools or plants) for which testing in an EMC laboratory
is not possible or viable. |
|
|
 |
|
| |
Objective: Object test with possibility of working out measures. |
| |
Measurements include: |
| |
· Testing
of interference field strength and interference voltage to EN 55011 |
| |
· Testing of
interference immunity, based in principle on
- EN 61000-4-2 ESD
- EN 61000-4-3 RF field
- EN 61000-4-4 Burst
- EN 61000-4-5 Surge
- EN 61000-4-6 Sinus |
 |
|
|
On-site measurements during development |
| |
Objective: Early detection of EMC problems during
the planning and implementation phases for products and systems. |
| |
|
|
Measurements of low-frequency
fields as caused, for example, by transformers, switching stations or transmitters. |
| |
In addition, we offer measurements of low-frequency
fields in office environments. Ideally before you move in to make sure
that there will be no interference with display workstations. We also carry
out measurements to 26. BImSchV. (ordinance on radiation protection). |
