Technical Forum

SIMATIC WinCC flexible

WinCC flexible 2008 SP3 has been released

Thread Starter: Sandman   Started: 1/26/2012 11:11 AM   Replies: 19

« Previous thread Next thread »
12» Page 1 of 2 (20 items)
  1/26/2012, 11:11 AM
Joined 4/29/2010
Last visit: 11/25/2014
Posts: 1557
Rating:
Rated: Outstanding [3.62 out of 5 / rated 151 time(s)]. (151) 
Users with special expertise supervising conferences
Rated: Outstanding [4 out of 5 / rated 4 time(s)]. (4) 
Hello,

the Service Pack 3 for SIMATIC WinCC flexible 2008 has been released for delivery.

delivery release: Service Pack 3 for SIMATIC WinCC flexible 2008

best regardsRnf:lblSmileyTooltip_sheep



=== Edited by Sandman @ 1/26/2012 2:14 PM [GMT ] ===


=== Edited by Sandman @ 1/26/2012 11:12 AM [GMT ] ===


Top
Thank you for this post from:
  1/26/2012, 12:59 PM
Joined 9/28/2005
Last visit: 7/4/2014
Posts: 2927
Rating:
Rated: Excellent [4.03 out of 5 / rated 214 time(s)]. (214) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Hi,

You forgot to mention that it will not be available for download anymore. You need to order it. Look here http://support.automation.siemens.com/WW/view/en/57267466.

"Due to the statutory regulations for export control we are no longer able to provide the service packs for downloading in the Service&Support Portal"


The same applies to SP2 for Step-7 5.5 or 2010 Pro, but this is another story blink




=== Edited by Darius @ 1/26/2012 1:01 PM [GMT ] ===



Regards,
--------------------------------
Darius
Automation engineer/programmer
Top
Thank you for this post from:
  1/26/2012, 2:15 PM
Joined 4/29/2010
Last visit: 11/25/2014
Posts: 1557
Rating:
Rated: Outstanding [3.62 out of 5 / rated 151 time(s)]. (151) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi Darius,
you are right, thank you Rnf:lblSmileyTooltip_ .

best regards

Top
  1/26/2012, 2:26 PM
Joined 3/21/2006
Last visit: 12/18/2014
Posts: 9899
Rating:
Rated: Outstanding [3.92 out of 5 / rated 1050 time(s)]. (1050) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Darius wrote:
...The same applies to SP2 for Step-7 5.5 or 2010 Pro, but this is another story blink

[OFFTOPIC]
So, why SP2 is not official announce as I understood already exist...Do you have some news about that Darius?

Best regards,
Hristo Mihalev
Top
  1/26/2012, 2:34 PM
Joined 9/28/2005
Last visit: 7/4/2014
Posts: 2927
Rating:
Rated: Excellent [4.03 out of 5 / rated 214 time(s)]. (214) 
Users with special expertise supervising conferences
Rated: Very Good [2 out of 5 / rated 2 time(s)]. (2) 
Hi UMENCHO,

UMENCHO wrote:

[OFFTOPIC]
So, why SP2 is not official announce as I understood already exist...Do you have some news about that Darius?


Well, it was announced here http://support.automation.siemens.com/WW/view/en/57025741
According to entry ID 57026032, you need also to order it as DVD



=== Edited by Darius @ 1/26/2012 2:35 PM [GMT ] ===



Regards,
--------------------------------
Darius
Automation engineer/programmer
Top
  1/26/2012, 2:53 PM
Joined 3/21/2006
Last visit: 12/18/2014
Posts: 9899
Rating:
Rated: Outstanding [3.92 out of 5 / rated 1050 time(s)]. (1050) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Upps! I missed it, even I searched for it.Rnf:lblSmileyTooltip_

Thank you!

Best regards,
Hristo Mihalev
Top
Thank you for this post from:
  1/26/2012, 2:56 PM
Joined 9/28/2005
Last visit: 7/4/2014
Posts: 2927
Rating:
Rated: Excellent [4.03 out of 5 / rated 214 time(s)]. (214) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
It happens Rnf:lblSmileyTooltip_

Regards,
--------------------------------
Darius
Automation engineer/programmer
Top
  1/26/2012, 4:23 PM
Joined 5/28/2008
Last visit: 12/18/2014
Posts: 3287
Rating:
Rated: Outstanding [3.71 out of 5 / rated 598 time(s)]. (598) 
Rated: Excellent [5 out of 5 / rated 2 time(s)]. (2) 
Hello,
Let me highlight something in the link that sandman already shared. For users with HP laptops. Please note the incompatability with your keyboard driver and SP3! 
But this problem has a solution. takecare.. you should know the solution before installing SP3. blink

Attachment: HP WinCC flex SP3.JPG  (315 Downloads)

Ayman Elotaify
MISC Egypt
www.miscegypt.com

Top
Thank you for this post from:
  1/27/2012, 1:51 PM
Joined 9/28/2005
Last visit: 7/4/2014
Posts: 2927
Rating:
Rated: Excellent [4.03 out of 5 / rated 214 time(s)]. (214) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi,

More info on HP laptop issue http://support.automation.siemens.com/WW/view/en/58217334

Regards,
--------------------------------
Darius
Automation engineer/programmer
Top
  3/13/2012, 7:16 AM
Joined 3/21/2006
Last visit: 12/18/2014
Posts: 9899
Rating:
Rated: Outstanding [3.92 out of 5 / rated 1050 time(s)]. (1050) 
Rated: Good [1 out of 5 / rated 1 time(s)]. (1) 
Update1 (Hotfix 1) for WinCC flexible 2008 SP3
http://support.automation.siemens.com/WW/view/en/58860033
Top
Thank you for this post from:
12» Page 1 of 2 (20 items)
Actions