Technical Forum

SINUMERIK CNC automation systems

error 2001 : 840d

Thread Starter: Cronos_zeus   Started: 10/23/2011 1:10 AM   Replies: 9

« Previous thread Next thread »
Page 1 of 1 (10 items)
  10/23/2011, 1:10 AM
Joined 10/22/2011
Last visit: 10/28/2011
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
hi
yesterday
our rafamet kch160N with sinumerik 840d start with :

error about battery and stuck in the startup menu with error "2001 : AP n'a pas eu lier', and error 6030, 4060, 2101, 2102. and the touch of sinumerik are changing bitween on and off.
i get the errosr showed in pics attached in the message

for information :
- i don't have software ton config the 840d all backup files are saved in an internal hard disk,
- i have all keys and password (even constructor pass)


ps : soory for my english

Attachment: IMG_1094.JPG  (59 Downloads)

Top
  10/23/2011, 10:39 AM
Joined 8/4/2009
Last visit: 7/19/2014
Posts: 2731
Rating:
Rated: Excellent [4.16 out of 5 / rated 422 time(s)]. (422) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello....

Error looks to be like PLC has not started up....try clear your clear your PLC and load the backup

you need to check why PLC has gone to stop mode witht the help of Simatic Step7 tool....

try clear your PLC and load the back up and check....

Regards,
Prakash
Top
  10/23/2011, 7:22 PM
Joined 10/22/2011
Last visit: 10/28/2011
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
hi thnks for your quick answer.

i don't have laptop with step 7 or any accessory to access the sinumerik.
so i try to backup the files from the internal HD of sinumerik i found 5 folders :

1-archive
2-pieces programs
3-put into service
4-programms
5-subprograms pieces

all this folders sontains the same files baut with a different size.

i tried to backup allfiles in all folders ( every time it ask me to replace i choose relpace)
one files (on each folders) cannot be backuped is " NCPLC.ARC"

i have the password of constructor

if i access with this password and backuped the 5 folders would the NCLC.ARC be buckuped or i have the make the backup differently? and what not to do to not erase my backup by a bad action?

tnks every one.
Top
  10/24/2011, 4:01 PM
Joined 8/4/2009
Last visit: 7/19/2014
Posts: 2731
Rating:
Rated: Excellent [4.16 out of 5 / rated 422 time(s)]. (422) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Hello....

My Best suggestion would be try clearing the NC and PLC and then load the archive backups.

Check this link

https://www.automation.siemens.com/WW/forum/guests/PostShow.aspx?PageIndex=1&PostID=223752&Language=en#top

Regards,
Prakash

Top
  10/24/2011, 4:41 PM
Joined 10/22/2011
Last visit: 10/28/2011
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Thinks for ur answer, first i applied the instruction S3 & S4 for initialising NC & PLC after that both the green led are "ON", after that i entzred the password SUNRISEand srart the backup i have 5 folders so i chose to access a folder named "archive" i selected the NCPLC.ARC (but there is a lot of file : gud kch hs vs ....) So backup of NCPLC.ARC started it goes perfectly at first but the contractended suddenly with a default : "IMPOSSIBLE TO RESET THE AP" May i missed something? For information i have a file NCPLC.ARC Best regards.



=== Edited by Cronos_zeus @ 10/24/2011 9:39 PM [GMT ] ===


Top
  10/25/2011, 6:03 AM
Joined 8/4/2009
Last visit: 7/19/2014
Posts: 2731
Rating:
Rated: Excellent [4.16 out of 5 / rated 422 time(s)]. (422) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello....

Do you have your backups by any chance in archive folder with NC archive and PLC archive seprate...check it....may be the backyo what your laoding have some errors

or the other way try speaking to your machine manufacturer and ask for the NC & PLC archive backups and the Step7 backups.....


Regards,
Prakash
 
Top
  10/25/2011, 10:40 AM
Joined 10/22/2011
Last visit: 10/28/2011
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi, No all I have is one file NCPLC.ARC but their is other files in the backup like kch160.arc nc_act.arc GUD.arc hs.arc VS.arc ...... Is their any way to perform a NCPLC reset in the same time? Another question when loading NCPLC.arc often it execute cn reset? Best regards.
Top
  10/25/2011, 12:21 PM
Joined 8/4/2009
Last visit: 7/19/2014
Posts: 2731
Rating:
Rated: Excellent [4.16 out of 5 / rated 422 time(s)]. (422) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello....

Could try loading all the files and check ????? when nc and plc archive backups are getting loaded it physically restarts that is not a problem. Once your all the backups are loaded you will find 2 green LED's and on Seven segement display 6 get dispalyed this indicates the healthy sign of NCU

Regards,
Prakash
Top
  10/25/2011, 3:48 PM
Joined 10/22/2011
Last visit: 10/28/2011
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi, I reset the NC then PLC and load all the files in the backup and finally the NCPLC.ARC of course all this with password SUNRISE. But in the end the contract it cancelled with error ''IMPOSSIBLE TO RESET THE AP MEMORY'' I will invite the constructor RAFAMET to do it with about 3thousand euro ( you know how constructors are) Any way thinks for your effort guys and best regards.
Top
  9/11/2013, 10:43 PM
Joined 9/1/2005
Last visit: 7/31/2014
Posts: 2613
Rating:
Rated: Excellent [4.02 out of 5 / rated 126 time(s)]. (126) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
new question is split to a seperate thread with the subject error 2001 : 840d after off state for 10 days.

Best regards
CS Moderator
Top
Page 1 of 1 (10 items)
Actions