Technical Forum

SIMATIC S7-300 / S7-300F

Dou you have the link of the manual for CPU 315-2DP,like for CPU 918?

Thread Starter: kingecit   Started: 7/22/2010 6:18 AM   Replies: 1

« Previous thread Next thread »
Page 1 of 1 (2 items)
  7/22/2010, 6:18 AM
Joined 3/16/2010
Last visit: 8/25/2010
Posts: 4
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Dear New Tech,
Thank you very much for your answers!
By the way,Dou you have the link of the manual for CPU 315-2DP,like for CPU 918?
Kind Regards!



=== Edited by CS Moderator @ 7/22/2010 10:35 PM [GMT ] ===
new subject after splitting

Top
  7/22/2010, 12:11 PM
Joined 9/27/2006
Last visit: 10/21/2014
Posts: 4828
Rating:
Rated: Excellent [4.22 out of 5 / rated 825 time(s)]. (825) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello kingecit;
There is no single manual for the different S7 CPUs, as you needed when working with S5 PLCs.
Here you will find different manuals for PLC techinal specifications, installation, and instruction lists fore your CPU.
Programming manuals have been installed in the Simatic/Documentation floder on the PC where you have installed Step 7, or can be downloaded through this support page.
Hope this helps,
Daniel Chartier
Top
Page 1 of 1 (2 items)
Actions