Technical Forum

SIMATIC WinCC (TIA Portal)

HMI flash error

Erstellt von Axel Foley am 12.01.2012 08:11 (12 Antworten)

« Vorheriges Thema Nächstes Thema »
«12 Seite 2 von 2 (13 Objekte)
  15.06.2012, 08:16
Beigetreten am: 03.04.2012
Letzter Besuch: 17.04.2013
Beiträge: 1
Bewertung:
Bewertung: keine [0 von 5 / 0 mal bewertet]. (0) 
Bewertung: keine [0 von 5 / 0 mal bewertet]. (0) 
Hi,

I had same problem and update OS does't work for me.

But I try recompile all program of panel compile -> Software (rebuild all) and after that and download to panel everything is OK.

Prochin


Top
  15.06.2012, 14:59
Beigetreten am: 01.09.2008
Letzter Besuch: 26.09.2012
Beiträge: 1
Bewertung:
Bewertung: keine [0 von 5 / 0 mal bewertet]. (0) 
Bewertung: keine [0 von 5 / 0 mal bewertet]. (0) 
Hi Guys

Same problem as just described by ello.
Also tried OS-Update as well as loading again.
So I figured it must have corrupted the application.
I rebooted the PC and compiled the entire application again, downloaded and it worked.
(using V11 SP2, 64Bit; TP700)

Regards

Top
  13.07.2012, 11:25
Beigetreten am: 31.01.2012
Letzter Besuch: 30.07.2012
Beiträge: 1
Bewertung:
Bewertung: keine [0 von 5 / 0 mal bewertet]. (0) 
Bewertung: keine [0 von 5 / 0 mal bewertet]. (0) 
Exactly. Had the same problem. Did the "Compile/Software (rebuild all)" and it was fixed. For a TP900 and a Runtime Advanced. Didn't had to update firmware/OS/etc.
Top
«12 Seite 2 von 2 (13 Objekte)
Aktionen