SIMATIC S5 / STEP 5

S5 PLC: Stop led

Thread Starter: Loret   Started: 8/8/2012 9:07 PM   Replies: 2

  8/8/2012, 9:07 PM

Loret Joined 8/8/2012 Last visit: 5/21/2013 Posts: 11 Rating:  (0)

(0)  Dear All i am new with simatic 5 plc I need your kind help to over come on the follwoing problems:- the STOP LED is lit in my s5 plc. i want to know if there is some way like diagonistic in S7 to check why the mode transfer to STOP and what can i do to run the plc. regards === Edited by Blue Moderator @ 8/8/2012 10:38 PM [GMT ] === Splitted from problem in siemens s5 100 cpu 102 and renamed === Edited by Blue Moderator @ 8/8/2012 10:38 PM [GMT ] === Splitted from problem in siemens s5 100 cpu 102 and renamed

Top

  8/9/2012, 8:03 AM

Marcjan Joined 4/22/2010 Last visit: 5/23/2013 Posts: 3208 Rating:  (295)	(0)  Hello, What system you have there? You can find the information in the I-stack(u-stack). Tables with discription of the fault can be found in the manual of your system. Regards, Marcjan Problem solved? Please let us know! Please no technical questions by PM, use the forum!
	Top

  8/9/2012, 11:18 PM

Loret Joined 8/8/2012 Last visit: 5/21/2013 Posts: 11 Rating:  (0)	(0)  Dear Marcjan i attached the picture for the istack, i mark with dot instead of x mark please if it is not clear inform me. i remeber last time we change the battery but no  matter with battery no , the problem not solved please i need your kind help   regards Attachment: istack.gif  (18 Downloads)
	Top