Print document

Technical Forum

Decentral Peripherie

ET200 IM151-1 connection problem

Thread Starter: laurensvl   Started: 8/6/2012 4:58 PM   Replies: 1

« Previous thread Next thread »
Page 1 of 1 (2 items)
  8/6/2012, 4:58 PM
laurensvl
Joined 12/27/2010
Last visit: 4/17/2013
Posts: 14
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

we have a problem with an ET200 station on the network. We configured 3 new stations with the same IM151-1 standard interface module (151-1AA05-0AB0). 2 of the stations where recognized immediately, but the last one gives an error "preset/actual mismatch". I checked the module,station adress and hardware config several times, but did not find any differences. I also tried with another IM151 and I also reconfigured the station entirely in the hardware config to be sure, but nothing works.
Anyone had this problem before? Are there other things I can check?

Thanks in advance!
Top
  8/7/2012, 9:15 AM
UMENCHO
Joined 3/21/2006
Last visit: 5/21/2013
Posts: 9063
Rating:
Rated: Outstanding [3.78 out of 5 / rated 820 time(s)]. (820) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

Are you sure in physical connection there? Delete the 'faulty' station and copy/paste of good one. Change the address (according physical configured one), save and compile, download again the hardware configuration.
Attach here hardware configuration project eventually.

Best regards,
Hristo Mihalev
Top
Page 1 of 1 (2 items)
Actions
Copy Link
To conference