STEP 7 Additional Software

Scl programming

Thread Starter: minipeddy   Started: 7/18/2012 12:10 AM   Replies: 3

  7/18/2012, 12:10 AM

minipeddy Joined 3/7/2012 Last visit: 5/15/2013 Posts: 59 Rating:  (0)

(0)  New to scl programming:   I'm trying to create a new scl block in all kinds of way but i do only get the fault message when i am compiling: The symbol allocation ("blockname"- Fb1) cannot be restored for this block. What the heck is going on ?  Im allso getting the message when i staring the program "the program conntains several errors in the data struckture". The soulution to this is by go to save as and reorgonize. (is there a link here and to the issue above )?

Top

  7/18/2012, 12:21 PM

Tagolover Joined 9/6/2008 Last visit: 5/20/2013 Posts: 986 Rating:  (55)	(0)  Hi Create a new project and check for the error. It seems that your project contains error in it. As for the block name is concern can you upload the project. Have fun... TAGOLOVER
	Top

  7/18/2012, 6:51 PM

hdhosseini Joined 1/28/2009 Last visit: 5/20/2013 Posts: 2859 Rating:  (394)	(0)  minipeddy wrote: New to scl programming:   Hello, If you are new, please refer to this clusters of posts: HD_SCL Starting Point and visual demonstration here: The High-Level Language S7-SCL Best regards, Hamid Hosseini Human beings are members of a whole , In creation of one essence and soul Sa'adi
	Top

  7/24/2012, 2:33 PM

madnesssm Joined 6/11/2012 Last visit: 5/20/2013 Posts: 19 Rating:  (0)	(0)  Hi, Try to check out your blocks. It's possible that you are calling function_block vice data_block. I had same problem and mine mistake was something like this Function_block DB FB, and that's wrong. Need somethnig like this Data_block DB FB. Good luck ;)
	Top