Process Control Systems SIMATIC PCS 7

Error of "OB100: call for FC50 is missing !

Thread Starter: Dorftrottel   Started: 8/23/2010 4:56 PM   Replies: 4

  8/23/2010, 4:56 PM

Dorftrottel Joined 8/10/2006 Last visit: 5/10/2013 Posts: 294 Rating:  (27)

(0)  Greetings, PCS7 project with IM151-8 CPU as part of the project. Wrote a block for analog conversion (IW3xx) to real value, min/max comparisions and alarming to ALARM_8P block.  Also use parameter switch {S7tasklist='OB100'} and startup call to RD_SINFO to  prevent startup alarming. When I drop it into CFC charts, it compiles with the error "CAUTION: OB100: call for FC50 is missing !" Any suggestions on what I should look for in my code? Jim

Top

  8/23/2010, 7:12 PM

Dorftrottel Joined 8/10/2006 Last visit: 5/10/2013 Posts: 294 Rating:  (27)	(0)  Removed the system attribute {S7_Tasklis='OB100'} and it compiles just fine.  However I cannot then do my startup check for errors.  Will have to check if the calls are not compatible with ET200S CPUs
	Top

  11/19/2010, 6:34 PM

Donada Joined 10/16/2010 Last visit: 11/19/2010 Posts: 1 Rating:  (0)

(0)  Dear All, I am also having some compilation errors similar to those above described. It follows below. It is a PCS7 project. E: CAUTION: OB1: call for FC5225 is missing ! E: CAUTION: OB100: call for FC5275 is missing ! E: CAUTION: OB121: call for FC5278 is missing ! E: CAUTION: OB122: call for FC5279 is missing ! E: CAUTION: OB70: call for FC5263 is missing ! E: CAUTION: OB72: call for FC5264 is missing ! E: CAUTION: OB80: call for FC5265 is missing ! E: CAUTION: OB81: call for FC5266 is missing ! E: CAUTION: OB82: call for FC5267 is missing ! E: CAUTION: OB83: call for FC5268 is missing ! E: CAUTION: OB84: call for FC5269 is missing ! E: CAUTION: OB85: call for FC5270 is missing ! E: CAUTION: OB86: call for FC5271 is missing ! E: CAUTION: OB88: call for FC5273 is missing ! Any help? With best regards,

Top

  6/13/2012, 3:19 AM

Kev00000000001 Joined 1/28/2010 Last visit: 11/13/2012 Posts: 5 Rating:  (1)	(1)  I had the same problem; E: CAUTION: OB100: call for FC2017 is missing ! E: CAUTION: OB121: call for FC2020 is missing ! E: CAUTION: OB122: call for FC2021 is missing ! The solution for me was to delete all ES-MAP authored objects and perform a full compile.
	Top
	Thank you for this post from: Silent Bob

  6/13/2012, 10:35 AM

Silent Bob Joined 2/24/2011 Last visit: 5/17/2013 Posts: 674 Rating:  (58)	(0)  Thanks Kev This is how to solve this kind of problem. It happens once in a while, but the solution is pretty simple. kind regards Silent Bob Tips & Tricks of forum usage - which contents are allowed:
	Top