Print document

Technical Forum

MICROMASTER

Eng'g Station PCS7 - Starter MM440 online comm. URGENT

Thread Starter: jacques_maurice   Started: 6/9/2012 1:22 AM   Replies: 1

« Previous thread Next thread »
Page 1 of 1 (2 items)
  6/9/2012, 1:22 AM
jacques_maurice
Joined 6/16/2011
Last visit: 2/26/2013
Posts: 14
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Dear All, i need your help on how to access the MM440 (Starter Software) through Eng'g station PCS7 to change the parameters. Please view my HW configuration and the MM440 drive (ZIP attached). Appreciate your help.

Attachment: Hardware.zip  (11 Downloads)
Top
  6/11/2012, 12:08 PM
Rated X
Joined 6/17/2011
Last visit: 5/24/2013
Posts: 1286
Rating:
Rated: Excellent [4.06 out of 5 / rated 82 time(s)]. (82) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Hi mexflexx,
 
to connect to the drive you will need the DriveES on the computer, as well as the STARTER application.
To configure the connection in Step7/NetPro you might try the following FAQ:
http://support.automation.siemens.com/WW/view/en/23432199

Gruß / best regards
Rated X
Top
Page 1 of 1 (2 items)
Actions
Copy Link
To conference