Technical Forum

SIMATIC WinCC flexible

TP177 MICRO and s7 200

Thread Starter: ambrish Started: 6/2/2012 3:26 PM Replies: 2

6/2/2012, 3:26 PM

ambrish

Joined 11/8/2006

Last visit: 5/15/2013

Posts: 51

Rating:

Rated: Excellent [4.5 out of 5 / rated 2 time(s)].

(2)

Rated: no ratings [0 out of 5 / rated 0 time(s)].

(0)

Dear Experts

I am working with TP177 Micro and s7 200.I have downloaded project in TP.Now I am not able to communicate between TP and PLC.What cable should be used?

Thanks

Ambris

NB:Please note that I am able to communicate with my s7 200 using microwin software and simatic PC addapter.Also I am able to download my WinCC Flexible project to TP.

=== Edited by ambrish @ 6/2/2012 3:39 PM [GMT ] ===

Top

6/2/2012, 4:40 PM

Ayman Elotaify

Joined 5/28/2008

Last visit: 5/23/2013

Posts: 2187

Rating:

Rated: Outstanding [3.65 out of 5 / rated 431 time(s)].

(431)

(0)

ambrish wrote:

Dear Experts

I am working with TP177 Micro and s7 200.I have downloaded project in TP.Now I am not able to communicate between TP and PLC.What cable should be used?

Thanks

Ambris

NB:Please note that I am able to communicate with my s7 200 using microwin software and simatic PC addapter.Also I am able to download my WinCC Flexible project to TP.

Hello ambrish,

Use profibus cable with two bus connector at both ends.

Hope this helps.

Ayman Elotaify
MISC Egypt
www.miscegypt.com

Top

6/3/2012, 9:36 AM

ambrish

Joined 11/8/2006

Last visit: 5/15/2013

Posts: 51

Rating:

(2)