SIMATIC WinCC flexible

Trends problem

Thread Starter: serge_pca   Started: 5/30/2012 3:48 PM   Replies: 2

  5/30/2012, 3:48 PM

serge_pca Joined 4/6/2010 Last visit: 5/7/2013 Posts: 6 Rating:  (0)	(0)  Hi all, I have a little trouble with the curve display in WinCC flexible. XX minutes after they disappear, so I only see the last XX minutes of recording, I can not go further afar in time. My curves are on "real-time triggering impulse" (every 60sec). Thank you in advance. Serge
	Top

  5/30/2012, 5:50 PM

Tweety Joined 9/5/2011 Last visit: 5/22/2013 Posts: 2571 Rating:  (131)	(0)  Hello serge_pca, Can you described your behaviour exactly? Can you post a screenshot with your curve? Can you described your parameters of your curve? You can see all function in the demo projects. Demo projects for SIMATIC Panels (WinCC flexible 2008), Panel PC and WinCC flexible PC Runtime Tweety === Edited by Tweety @ 5/30/2012 6:00 PM [GMT ] ===
	Top

  5/31/2012, 9:02 AM

IBN-Service Joined 3/15/2008 Last visit: 5/20/2013 Posts: 4434 Rating:  (409)

(0)  serge_pca wrote: Hi all, I have a little trouble with the curve display in WinCC flexible. XX minutes after they disappear, so I only see the last XX minutes of recording, I can not go further afar in time. My curves are on "real-time triggering impulse" (every 60sec). Thank you in advance. Serge Your problem is, that your resolution needs more as adjusted amount of data points. Increase the amount of data points of the curve. Maximum number is 999, so that you can do max. trend: 999 x 60 sex = 2,75 hours Industrieautomation: Softwareerstellung und Inbetriebnahme weltweit. http://www.ibn-service.com

Top