Print document

Technical Forum

SIMATIC S5 / STEP 5

Symatic S5 startUp help

Thread Starter: fury_omen   Started: 5/24/2012 6:54 PM   Replies: 3

« Previous thread Next thread »
Page 1 of 1 (4 items)
  5/24/2012, 6:54 PM
fury_omen
Joined 10/17/2010
Last visit: 10/22/2012
Posts: 16
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
I start a new job and there are a lot of S5 PLC systems. The problem is what i dont know it. In net i found i lot of infos for step5 and simatic s5 systems but nothing really helpful. So i want to know form there to start and need some good tutorila or programing exaples. Thanks for help in advance Rnf:lblSmileyTooltip_ think
Top
  5/24/2012, 6:59 PM
IBN-Service
Joined 3/15/2008
Last visit: 5/18/2013
Posts: 4434
Rating:
Rated: Outstanding [3.88 out of 5 / rated 409 time(s)]. (409) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
If you have no S5 experience,
maybe you should read the book "Hans Berger programming with step 5"

Industrieautomation: Softwareerstellung und Inbetriebnahme weltweit.
http://www.ibn-service.com
Top
  5/24/2012, 7:08 PM
fury_omen
Joined 10/17/2010
Last visit: 10/22/2012
Posts: 16
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Good, ..... but something free for start ?
Top
  5/24/2012, 7:31 PM
BeVee
Joined 7/18/2011
Last visit: 4/9/2013
Posts: 277
Rating:
Rated: Outstanding [4 out of 5 / rated 31 time(s)]. (31) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Hello fury_omen,

You could take a look here.

Some more suggestions:

Make yourself a 'test-station' with some spare parts.
Assemble an S5-station (PG or laptop) with all tools (hardware, software, cables, ...)  you will need in your factory.
Convince your boss to switch ASAP to S7

Kind regards,
BV





=== Edited by BeVee @ 5/24/2012 7:32 PM [GMT ] ===
Fixed some typing err''''s
Top
Page 1 of 1 (4 items)
Actions
Copy Link
To conference