SIMATIC TDC, FM458, T400

msg problem in simatic tdc

Thread Starter: vijay1313   Started: 5/21/2012 9:17 AM   Replies: 1

  5/21/2012, 9:17 AM

vijay1313 Joined 5/21/2012 Last visit: 5/26/2012 Posts: 6 Rating:  (0)

(0)    Hi miami i have create msg block in cfc for simatic tdc and made itself a master through master=1, and also do tdc transfer..its succesfully generate delete file and new csv file and i hve also export it successfully in wincc explore through simtra..i hve do all process which listed in sop of siemence, but i cant get msg number in msg block in cfc..i hve doubt on my msg structure and area defined... this my msg structure: 'SGC not calibrated @AH@SS11@@SG3' how to create area in HMI, for ex. here SS11, here i have use this from other block which configured by siemence engineer plz help me.. === Edited by O_Moderator @ 5/21/2012 10:15 AM [GMT ] === new subject after splitting from Difference in S7 300 and S7 400

Top

  5/21/2012, 10:15 AM

O_Moderator Joined 4/24/2009 Last visit: 5/23/2013 Posts: 1947 Rating:  (100)	(0)  Thread closed, because question is already published in the following thread msgs problem in simatic tdc. Best regards O_Moderator
	Top