Print document

Technical Forum

SIMATIC S7-1200

S7 1200 Error

Thread Starter: DineshA   Started: 5/17/2012 5:35 AM   Replies: 3

« Previous thread Next thread »
Page 1 of 1 (4 items)
  5/17/2012, 5:35 AM
DineshA
Joined 2/27/2012
Last visit: 6/10/2013
Posts: 15
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Dear Masters,

       I am using S7 1200 CPU 1214C and software Totally Integrated Automation Portal V 10.5 SP2.
Now while compiling my program i am facing error as "The application has encountered proble needs to be close    Would u like to restart the application".Same snap is attahced here.
       So let me know if anything i am missing.

Attachment: S7 1200 Error.JPG  (14 Downloads)
Top
  5/17/2012, 5:53 AM
huggy_d1
Joined 7/7/2010
Last visit: 6/19/2013
Posts: 1999
Rating:
Rated: Excellent [4 out of 5 / rated 203 time(s)]. (203) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
DineshA wrote:
Dear Masters,

       I am using S7 1200 CPU 1214C and software Totally Integrated Automation Portal V 10.5 SP2.
Now while compiling my program i am facing error as "The application has encountered proble needs to be close    Would u like to restart the application".Same snap is attahced here.
       So let me know if anything i am missing.
Take a look at the suggestions make for a nearly identical problem in this thread:

https://www.automation.siemens.com/WW/forum/guests/PostShow.aspx?PageIndex=1&PostID=373913&Language=en#top
Helpful? Rate it.
Solved? Post it.
Top
  5/17/2012, 9:36 AM
DineshA
Joined 2/27/2012
Last visit: 6/10/2013
Posts: 15
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Dear huggy_d1,
            Thank you for your help.....i did all the options you mentioned in the earlier message...but still i am facing same problem.......sad.Let me know if you are having any other solution.....
Top
  5/17/2012, 1:01 PM
huggy_d1
Joined 7/7/2010
Last visit: 6/19/2013
Posts: 1999
Rating:
Rated: Excellent [4 out of 5 / rated 203 time(s)]. (203) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
DineshA wrote:
Dear huggy_d1,
            Thank you for your help.....i did all the options you mentioned in the earlier message...but still i am facing same problem.......sad.Let me know if you are having any other solution.....
ok, now it is time for the more time consuming and less perfect options.

Option 1:
Use a 2nd copy of TIA Portal to recreate your exact hardware configuration, then drag / drop (select, copy/paste) from the crashing project into a brand new project.  Copy all items including plc tags, dbs, fbs, fcs, OBs, then close the crashing project.  In the new project, save the new project to a new project name, maybe "old_project_name_restored.ap10".  Now try the compile (rebuild all blocks).  It should come up with the error causing the crash with your code so you can correct it.  I have had situations like yours where my code was correct and this solved the problem.

Option 2:
Use the online access tool to copy from your PLC back to the 'new' project and recreate the project.  This will lose your comments, but it will work.

Option 3:
Use an old backup of the project, then compare it with your online project and update manually.

Post your results on which option worked best.
Helpful? Rate it.
Solved? Post it.
Top
Page 1 of 1 (4 items)
Actions
Copy Link
To conference