Print document

Technical Forum

Industrial PC SIMATIC PC

Touch Panel Power Supply Type?(IPC 577c)

Thread Starter: Abdulla   Started: 3/21/2012 3:41 PM   Replies: 4

« Previous thread Next thread »
Page 1 of 1 (5 items)
  3/21/2012, 3:41 PM
Abdulla
Joined 11/23/2010
Last visit: 5/1/2013
Posts: 11
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Dear sir,

I have below item number:

"6av7 885-2ae21-1da2"

I am looking to know what is power supply request for this item.

As per manuals, it can be 220-100VAC or 24VDC.

So how can I know my item is AC or DC?

 

Note: This item is not in front of me to check, I only have the part number and I need to make some power calculation based on that.
Top
  3/22/2012, 7:51 AM
Marcjan
Joined 4/22/2010
Last visit: 5/24/2013
Posts: 3213
Rating:
Rated: Excellent [4.11 out of 5 / rated 295 time(s)]. (295) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

According to Manual chapter 6 it can be supplied by 24VDC or by 100 to 240VAC.
So your panel have both options.
Power consumpion in both cases about 90W.
The spec of your device series:
http://support.automation.siemens.com/WW/view/en/36457835/td

Regards,

Marcjan



=== Edited by Marcjan @ 3/22/2012 8:08 AM [GMT ] ===


=== Edited by Marcjan @ 3/22/2012 7:56 AM [GMT ] ===


=== Edited by Marcjan @ 3/22/2012 7:52 AM [GMT ] ===


Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!
Top
  3/22/2012, 1:26 PM
Ayman Elotaify
Joined 5/28/2008
Last visit: 5/23/2013
Posts: 2187
Rating:
Rated: Outstanding [3.65 out of 5 / rated 431 time(s)]. (431) 
Rated: Excellent [5 out of 5 / rated 1 time(s)]. (1) 
Abdulla wrote:

Dear sir,

I have below item number:

"6av7 885-2ae21-1da2"

I am looking to know what is power supply request for this item.

As per manuals, it can be 220-100VAC or 24VDC.

So how can I know my item is AC or DC?

 

Note: This item is not in front of me to check, I only have the part number and I need to make some power calculation based on that.

Hello,
A short Answer: Your device power is AC 110/230 V "6AV7 885-2AE21-1DA2" And not 24VDC
The last digit identify the voltage and power cord type.
If it was 24VDC the part number should be "6AV7 885-2AE21-1DA8"

Selection of last digit:
last digit description
1 110/230V AC Industrial PS with Namur; no power cord
2 110/230V AC Industrial PS with Namur; Power cord Europe
3 110/230V AC Industrial PS with Namur; Power cord USA
4 110/230V AC Industrial PS with Namur; Power cord China
5 110/230V AC Industrial PS with Namur; Power cord Italy
6 110/230V AC Industrial PS with Namur; Power cord Switzerland
7 110/230V AC Industrial PS with Namur; Power cord UK
8 24V DC Industrial Power Supply


And for checking configuration and ordering data, please visit the following link "configurators":
Hope this helps.

Attachment: PC.JPG  (5 Downloads)
Ayman Elotaify
MISC Egypt
www.miscegypt.com

Top
Thank you for this post from:
Marcjan, Abdulla
  3/22/2012, 1:34 PM
Marcjan
Joined 4/22/2010
Last visit: 5/24/2013
Posts: 3213
Rating:
Rated: Excellent [4.11 out of 5 / rated 295 time(s)]. (295) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

Thanks for the correction, reading the stuff i could find was a bit confusingblush

Learned again.

Regards,

Marcjan
Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!
Top
Thank you for this post from:
Ayman Elotaify
  3/24/2012, 6:26 AM
Abdulla
Joined 11/23/2010
Last visit: 5/1/2013
Posts: 11
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Thank you Mr. Ayman,
This is really useful.
Top
Thank you for this post from:
Ayman Elotaify
Page 1 of 1 (5 items)
Actions
Copy Link
To conference