Technical Forum

Communication / Networks

Read current IP details in LAD

Thread Starter: jon_hill988 Started: 3/23/2012 10:54 AM Replies: 3

3/23/2012, 10:54 AM

jon_hill988

Joined 3/7/2012

Last visit: 12/21/2012

Posts: 12

Rating:

(0)

Hi,

I am using T_CONFIG to set the IP address of the PLC and was wondering if there is a block to do the oposite, read back the currently set IP address into my lader program/data blocks.

Thanks.

Jon

Top

3/23/2012, 11:13 AM

Pegaia

Joined 7/24/2008

Last visit: 5/25/2013

Posts: 2033

Rating:

Rated: Excellent [4.31 out of 5 / rated 355 time(s)].

(355)

Users with special expertise supervising conferences

(0)

Hi,

Why do you need to know that? Rnf:lblSmileyTooltip_ think

Denilson Pegaia
Siemens Industry Sector
Industry Automation and Drive Technologies Division
- Technical Support & Hotline -
Rua Werner Siemens, 111
05069-900 São Paulo
Hotline – Atenção ao Cliente
Tel.: +55 11 3833-4040
E-Mail: atencao.cliente.ac.br@siemens.com
Homepage Brasil: www.siemens.com.br
Manuais / FAQ’s / Downloads: http://www.Siemens.com.br/Servicos&Suporte

Top

3/23/2012, 11:25 AM

jon_hill988

Joined 3/7/2012

Last visit: 12/21/2012

Posts: 12

Rating:

(0)

It's a nice to know rather than a need to know, I want to use it to auto populate the fields on my user web page form to change the IP address, Subnet Mask and Default Gateway. The idea is it will prevent the user having to type in the whole thing if they only want to change part of the settings.

=== Edited by jon_hill988 @ 3/23/2012 4:38 PM [GMT ] ===

Top

5/14/2012, 4:32 PM

buckler

Joined 1/5/2011

Last visit: 5/9/2013

Posts: 1

Rating:

(0)

This is exactly what I would like to do. I want to display the IP on the attached profinet HMI to aid in future connectivity.

=== Edited by buckler @ 5/14/2012 4:32 PM [GMT ] ===

Top

Actions

Copy Link

To conference