Print document

Technical Forum

SIMODRIVE Converter system

Torque Moniter

Thread Starter: CNC Chennai   Started: 3/16/2012 8:16 AM   Replies: 2

« Previous thread Next thread »
Page 1 of 1 (3 items)
  3/16/2012, 8:16 AM
CNC Chennai
Joined 12/5/2006
Last visit: 11/26/2012
Posts: 112
Rating:
Rated: Excellent [5 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Dear All

In 840D / 611D How to Moniter an Servo Motor 

1) Torque
2) Load 
3) Motor NM

Thanks in Advance
Top
  4/23/2012, 1:29 PM
RAM81
Joined 3/3/2008
Last visit: 5/3/2013
Posts: 332
Rating:
Rated: Outstanding [3.38 out of 5 / rated 45 time(s)]. (45) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
hi
its an option to monitor the load and current parameters
the option is

6FC5 251-0AB17-0AA0


regards
ram
Top
  4/23/2012, 9:16 PM
tommy.h
Joined 9/19/2010
Last visit: 5/6/2013
Posts: 15
Rating:
Rated: Excellent [5 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Hi

As RAM81 suggested you need to buy option for these drive signals.

After the option is activated, set axis MD36730 DRIVE_SIGNAL_TRACKING to 1 for the axis you need to monitor, then the signals is communicated in the different system variables, e.g $AA_LOAD[ax].

 

Tommy

 
Top
Page 1 of 1 (3 items)
Actions
Copy Link
To conference