SIMATIC ProTool / ProTool/Pro

OP27 ? Protool ? prosave

Thread Starter: ABDO_2011   Started: 2/25/2012 1:24 AM   Replies: 4

  2/25/2012, 1:24 AM

ABDO_2011 Joined 1/19/2011 Last visit: 7/18/2012 Posts: 6 Rating:  (0)	(0)  HI ............................................................ I have " OP27 screen , Windows XP SP2 , Protool V6.0 SP3 , proSave V7.0.0.1 " I use 6XV1440-2K cable for connection I can upload the OP27's program by proSave . But I can't upload it by Protool What I have to do THANKS.................................................... Attachment: cable.gif  (30 Downloads)
	Top

  2/25/2012, 11:24 AM

IBN-Service Joined 3/15/2008 Last visit: 6/18/2013 Posts: 4443 Rating:  (415)	(0)  Is the COM - port setting in ProTool correct? Did you get any message? Do you switch the panel to transfer mode? Industrieautomation: Softwareerstellung und Inbetriebnahme weltweit. http://www.ibn-service.com
	Top

  2/26/2012, 7:39 AM

UMENCHO Joined 3/21/2006 Last visit: 6/17/2013 Posts: 9063 Rating:  (820)	(0)  There is not option to backtransfer the project from OP27 using Protool. Best regards, Hristo Mihalev
	Top

  2/27/2012, 12:35 AM

ABDO_2011 Joined 1/19/2011 Last visit: 7/18/2012 Posts: 6 Rating:  (0)	(0)  THANKS.................................. The attachment is the main protool window , that is what I did. anyway I don't have the program and I need to understand all the machine parts so I need the PLC's program and OP27's program My proplem is How can I read the OP27's program ????????? THANKS................................ Attachment: protool screen.jpg  (34 Downloads)
	Top

  2/27/2012, 7:11 AM

UMENCHO Joined 3/21/2006 Last visit: 6/17/2013 Posts: 9063 Rating:  (820)	(0)  There is not way to read out the program using Protool or any software. You could try to understand the logic using the PLC program only. Best rergards, Hristo Mihalev
	Top