Print document

Technical Forum

SIMATIC 505

TI 555 via NITP over serial

Thread Starter: WillZ   Started: 12/21/2011 12:18 AM   Replies: 3

« Previous thread Next thread »
Page 1 of 1 (4 items)
  12/21/2011, 12:18 AM
WillZ
Joined 11/11/2010
Last visit: 3/13/2012
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello All: 
I am communicating with a TI 555 via NITP over serial.  I am getting undocumented error codes as follows:

*Unable to read block starting at 'C###':  Error code 0
*Other error codes for reading control relays are same wording but have codes: "1", "14", "62", "224", "239", and "243".

Any wise soul know what these codes mean?  I am thinking my next step is serial sniffer just so I can at least relate the error code to the command...painful process that I would be much obliged to avoid.

Thanks,
Will



=== Edited by O_Moderator @ 12/21/2011 8:13 PM [GMT ] ===
new subject after splitting from TI 545 cpu mast. s7315 2pn/dp sla. profibus com. example pro.
Top
  12/21/2011, 1:04 PM
billwest
Joined 6/20/2007
Last visit: 5/23/2013
Posts: 402
Rating:
Rated: Excellent [4.16 out of 5 / rated 61 time(s)]. (61) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
You really need to start a new thread since this is a different topic than Com Profibus. You will get a better response.  When you start the new thread, you need to indicate the device that is displaying the errors.
Thank youRnf:lblSmileyTooltip_bell
billwest
Bill West
Consulting Sales Application Engineer
Siemens Industry, Inc.
Industry Automation
Industrial Automation Systems
1900 Musket Court
Stone Mountain, GA 30087
Work: 770-310-5965
Top
  12/21/2011, 4:01 PM
WillZ
Joined 11/11/2010
Last visit: 3/13/2012
Posts: 5
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Bill:
You are absolutely correct and followed instructions to do so.  Your input here is outstanding and much appreciated.  I also take this opportunity to wish you and yours a joyful holiday season. 
Truly,
Will Zurkan
Top
  12/28/2011, 2:05 AM
billwest
Joined 6/20/2007
Last visit: 5/23/2013
Posts: 402
Rating:
Rated: Excellent [4.16 out of 5 / rated 61 time(s)]. (61) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Thank you,
What device is returning the errors? Is it an HMI?
billwestRnf:lblSmileyTooltip_bell
Bill West
Consulting Sales Application Engineer
Siemens Industry, Inc.
Industry Automation
Industrial Automation Systems
1900 Musket Court
Stone Mountain, GA 30087
Work: 770-310-5965
Top
Page 1 of 1 (4 items)
Actions
Copy Link
To conference