SINUMERIK CNC automation systems

802S - pick Z value in part program

Thread Starter: hookipa   Started: 11/15/2011 11:59 AM   Replies: 4

  11/15/2011, 11:59 AM

hookipa Joined 12/18/2008 Last visit: 4/5/2013 Posts: 50 Rating:  (0)	(0)  Hello, i am looking for a function in G-CODE like this : R23=Z  to pick the actual Z value when I start the program. Regards, Patrice
	Top

  11/15/2011, 12:48 PM

Zub04 Joined 7/15/2009 Last visit: 6/4/2013 Posts: 28 Rating:  (0)	(0)  Hi, try: R23=$AA_IW[Z] for workpiece coordinate system R23=$AA_IM[Z] for machine coordinate system regards
	Top

  11/15/2011, 2:16 PM

hookipa Joined 12/18/2008 Last visit: 4/5/2013 Posts: 50 Rating:  (0)	(0)  Thank for your help but this option seems not included in my 802S.I got this message : identifier $AA_IW not defined. Regards, Patrice
	Top

  11/15/2011, 2:27 PM

Zub04 Joined 7/15/2009 Last visit: 6/4/2013 Posts: 28 Rating:  (0)	(0)  Error 12400 Channel 1 block 1 field $AA_IW element does not exist ?? Did you write $AA_IW[Z] exactly? regards zub
	Top

  11/15/2011, 2:50 PM

hookipa Joined 12/18/2008 Last visit: 4/5/2013 Posts: 50 Rating:  (0)	(0)  Yes but in the error message it's just writed $AA_IW Regards, PAtrice
	Top