Other Process Control Systems

siject 15-b programming problem

Thread Starter: patel   Started: 4/24/2010 1:42 PM   Replies: 1

  4/24/2010, 1:42 PM

patel Joined 7/10/2008 Last visit: 5/6/2013 Posts: 115 Rating:  (0)

(0)  Hi.. I have one SIJECT -15B of MLFB NO:6AT1131-5BB20-0XB0 . I have never worked on this before. I know that it is used for moulding machne control. But i want to know that how can i use it? From manual, i got little help but still i have doubt. 1)How can i program this SIJECT-15B.Do i need to program it or it is preprogrammed? 2)If it is preprogrammed than if i want to chane the logic, can i ? How? 3)Can i change screens on it? if yes than how? which software is req? Please take it urgently.

Top

  10/25/2011, 9:12 PM

Agamenon Joined 10/25/2011 Last visit: 10/25/2011 Posts: 1 Rating:  (0)	(0)  Hi Patel! 1.- You can program your PLC Siject with Step 7 Professional and a MPI Cable. 2.- You can change any Logic in PLC using KOP, FUP or AWL languages.  3.- The Screens using a monitor with tactil screen or keyboard called HMI, you can change anything using WinCC 2008. Best Regards! Eli Godoy
	Top