PC-based Automation

EC31 and communication

Thread Starter: sfa   Started: 10/27/2010 9:00 PM   Replies: 1

  10/27/2010, 9:00 PM

sfa Joined 2/23/2006 Last visit: 2/22/2011 Posts: 70 Rating:  (3)	(0)  Hi gre_m gre_m wrote: EC31 is a widows XP PC-computer. You can write own programm for communication, such a C++   Do you have to use the ODK to do that ? Can I make a FB or similar that could utilise communication interface not inserted as IF1-4 ? /søren Splitted from EC31 and open communication. === Edited by O_Moderator @ 10/28/2010 9:20 AM [GMT ] === new subject after splitting
	Top

  10/28/2010, 6:46 PM

gre_m Joined 9/27/2005 Last visit: 5/22/2013 Posts: 934 Rating:  (36)

(0)  Hello sfa I not have EC31. But i know: EC31 use Intel PC-compatible motherboard. EC31 has 2 ethernet controllers: Profinet, CP1604 compatible, and "office" ethernet controller. OS EC31 - Winows  XP embedded, and soft You must write on C/C++, or delphi, or visual studio. If you want use Siemens FB, then You should use with EC31  WinAC RTX. SIMATIC Windows Automation Center RTX WinAC RTX (F) 2010: http://support.automation.siemens.com/WW/view/en/43715176 New manual for MEC http://support.automation.siemens.com/WW/view/en/46360353 === Edited by gre_m @ 11/3/2010 9:04 AM [GMT ] ===

Top