STEP 7 Additional Software

program can not looping

Thread Starter: peters   Started: 1/8/2009 6:18 AM   Replies: 2

  1/8/2009, 6:18 AM

peters Joined 2/9/2006 Last visit: 1/11/2012 Posts: 122 Rating:  (3)	(0)  dear experts: when i finished the programming according to the manual and downloaded it to PLCSIM and tested but found that the program can not looping,i don't know why.(there are only 3 networks as you can see in OB1)please see the drawing attached.thanks! Attachment: cycling.zip  (13 Downloads)
	Top

  1/8/2009, 8:45 AM

GrzegorzG Joined 1/22/2008 Last visit: 10/1/2012 Posts: 63 Rating:  (14)	(0)  Your program is looping but you cannot see what's happening inside loop due to purposes of monitoring functions. If you want to be sure that loop works just add L MW0 command after the loop and look at its contents.
	Top

  1/9/2009, 2:09 AM

peters Joined 2/9/2006 Last visit: 1/11/2012 Posts: 122 Rating:  (3)	(0)  Mr GrzegorzG: thank you very much!i have tried what you told me to test and found that the looping function is ok! Attachment: result of testing.zip  (4 Downloads)
	Top