SIMOVERT MASTERDRIVES

SIMOVERT CUVC MODULE 6SE7090-0XX84-0AB0

Thread Starter: jamo   Started: 4/14/2008 3:42 PM   Replies: 2

  4/14/2008, 3:42 PM

jamo Joined 4/19/2007 Last visit: 7/28/2008 Posts: 6 Rating:  (0)

(0)  Hi , I replaced the CUVC module 6SE7090-0XX84-0AB0 in a master drive. However, there is a big problem in that the drive is indicating it as a CUSA module. What does this mean. When I scroll through the parameters - I get to parameter P073 and then the drives jumps to P0800. What could be the cause of this as the part no. of the original device and the replacement are the same. What extra parametarisation do you have to do when you make this replacement.

Top

  4/15/2008, 4:46 AM

diwa Joined 9/20/2006 Last visit: 5/17/2013 Posts: 295 Rating:  (62)	(0)  Can you upload a photo of the new card. Maybe it is a CUSA but a wrong sticker put on it by mistake. In the meantime i will also check if other way to confirm.
	Top

  7/9/2009, 12:08 PM

BohdanK Joined 7/9/2009 Last visit: 7/9/2009 Posts: 1 Rating:  (0)	(0)  Have someone any information about this module? Technical data or some descriptions?
	Top