Technical Forum

STEP 7 (TIA Portal)

Upload 10.5 program with V11

Thread Starter: syd_b Started: 8/2/2012 6:30 PM Replies: 3

8/2/2012, 6:30 PM

syd_b

Joined 2/3/2011

Last visit: 6/17/2013

Posts: 169

Rating:

(0)

Hi, if I have a S7-1200 running with a program made in v10.5 and I want to make an upload of the program with v11. Is it possible to do this?

Thanks.

Top

8/3/2012, 8:49 AM

UMENCHO

Joined 3/21/2006

Last visit: 6/17/2013

Posts: 9063

Rating:

Rated: Outstanding [3.78 out of 5 / rated 820 time(s)].

(820)

(0)

Hello,

I guess it will not make it successfully. But if you have a chance try it and post a feedback here.

Best regards,

Hristo Mihalev

Top

8/3/2012, 3:43 PM

huggy_d1

Joined 7/7/2010

Last visit: 6/18/2013

Posts: 1998

Rating:

Rated: Excellent [4 out of 5 / rated 203 time(s)].

(203)

Users with special expertise supervising conferences

(0)

syd_b wrote:

Hi, if I have a S7-1200 running with a program made in v10.5 and I want to make an upload of the program with v11. Is it possible to do this?

Thanks.

If you can get online with the project, you can make at least a partial backup of the system. You cannot make a 100% identical project, but if you have no other option, you should be able to save your system logic and most of the configuration for the system. If you are using the latest service pack and update (v11 SP2 update 4), you should have the highest opportunity for the most success.

Helpful? Rate it.
Solved? Post it.

Top

8/4/2012, 9:07 AM

UMENCHO

Joined 3/21/2006

Last visit: 6/17/2013

Posts: 9063

Rating:

(820)

(0)

And you can check https://www.automation.siemens.com/WW/forum/guests/PostShow.aspx?PageIndex=1&PostID=351558&Language=en#top Rnf:lblSmileyTooltip_ think