Print document

Technical Forum

Communication / Networks

Modbus TCP via Three VilterVision20/20

Thread Starter: Heartbroken   Started: 6/7/2012 12:48 PM   Replies: 4

« Previous thread Next thread »
Page 1 of 1 (5 items)
  6/7/2012, 12:48 PM
Heartbroken
Joined 5/31/2012
Last visit: 11/14/2012
Posts: 12
Rating:
Rated: Outstanding [4 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Dear Experts,

I  successfully  communicate the vilter vision20/20 on one device only. Now i have to communicate with three devices. I copy FB102 with designated instance DB's (DB102, DB103, DB104) called on OB1, and also called on OB100 with different parameter DB's (DB2,DB60,DB70). I different error on IDB "809B", "A080". I already used TCP wizard to parameterization.

Here i attached some picture i encountered.


Best Regards,
Heartbroken

Attachment: Siemenssupport.zip  (11 Downloads)
Top
  6/11/2012, 1:07 PM
Kaulquappe
Joined 11/27/2007
Last visit: 6/18/2013
Posts: 877
Rating:
Rated: Outstanding [3.85 out of 5 / rated 62 time(s)]. (62) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Hello Heartbroken,
you should use different connection IDs.

Regards,
Kaulquappe
Top
  6/11/2012, 6:18 PM
Heartbroken
Joined 5/31/2012
Last visit: 11/14/2012
Posts: 12
Rating:
Rated: Outstanding [4 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Thanks, 

"80A1" and "TRCV" were status of my program. 

Attachment: 3Vat_Vilter.gif  (5 Downloads)
Top
  6/12/2012, 11:19 AM
Kaulquappe
Joined 11/27/2007
Last visit: 6/18/2013
Posts: 877
Rating:
Rated: Outstanding [3.85 out of 5 / rated 62 time(s)]. (62) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello Heartbroken,
I had again a look at your first attachment. You can't use the same variables to coordinate the activation of the different Modbus block calls.

Regards,
Kaulquappe
Top
  6/28/2012, 4:56 AM
Heartbroken
Joined 5/31/2012
Last visit: 11/14/2012
Posts: 12
Rating:
Rated: Outstanding [4 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Thank you for support, i already communicate 3 vilter compressor.. compressor must used identical ID # =1 other than that vilter will not communicate.

Regards,
Heartbroken
Top
Page 1 of 1 (5 items)
Actions
Copy Link
To conference