Print document

Technical Forum

SIMATIC S7-200

Project opening error

Thread Starter: JJJ   Started: 5/7/2012 2:02 PM   Replies: 7

« Previous thread Next thread »
Page 1 of 1 (8 items)
  5/7/2012, 2:02 PM
JJJ
Joined 5/3/2012
Last visit: 6/21/2012
Posts: 39
Rating:
Rated: Excellent [5 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

While opening a project i got an error as attached.

Software: Microwin V4.0 SP7

Any idea,

What could be the reason??

Attachment: error.JPG  (26 Downloads)
Top
  5/7/2012, 2:12 PM
pfuser
Joined 9/18/2006
Last visit: 5/16/2013
Posts: 546
Rating:
Rated: Outstanding [4 out of 5 / rated 57 time(s)]. (57) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
JIH wrote:
Hello,

While opening a project i got an error as attached.

Software: Microwin V4.0 SP7

Any idea,

What could be the reason??

Hi.

Select the mode of IEC in new progect. Then you can open the project.

Best regards.


Attachment: Program mode_simatic_IEC.JPG  (22 Downloads)
Top
Thank you for this post from:
JJJ
  5/7/2012, 2:30 PM
JJJ
Joined 5/3/2012
Last visit: 6/21/2012
Posts: 39
Rating:
Rated: Excellent [5 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
pfuser wrote:
JIH wrote:
Hello,

While opening a project i got an error as attached.

Software: Microwin V4.0 SP7

Any idea,

What could be the reason??

Hi.

Select the mode of IEC in new progect. Then you can open the project.

Best regards.



Thnaks for prompt reply.

what is the difference between simatic and IEC 1131?
Top
  5/7/2012, 2:37 PM
Marcjan
Joined 4/22/2010
Last visit: 5/24/2013
Posts: 3213
Rating:
Rated: Excellent [4.11 out of 5 / rated 295 time(s)]. (295) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

IEC 1131 is a standard programming methode for all PLC brands that accept the rules http://www.rockwellsoftware.com/corporate/reference/Iec1131/
Simatic is Siemens own language.

Regards,

Marcjan
Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!
Top
Thank you for this post from:
JJJ, Nicky123
  5/8/2012, 3:40 PM
JJJ
Joined 5/3/2012
Last visit: 6/21/2012
Posts: 39
Rating:
Rated: Excellent [5 out of 5 / rated 1 time(s)]. (1) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Thank you Marcjan for providing such useful link.
Top
Thank you for this post from:
Marcjan
  5/21/2012, 2:01 PM
David Stetz
Joined 4/15/2011
Last visit: 5/21/2012
Posts: 2
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello-

I have a the same problem opening the file, however, cannot change the programming mode of a new project as you have suggested.  The programming mode for a new file is always selected as SIMATIC and the option buttons are grayed out.  Micro/Win version V4.05.08.

Attachment: S7200options.jpg  (7 Downloads)
Top
  5/21/2012, 2:08 PM
Marcjan
Joined 4/22/2010
Last visit: 5/24/2013
Posts: 3213
Rating:
Rated: Excellent [4.11 out of 5 / rated 295 time(s)]. (295) 
Users with special expertise supervising conferences
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

Try this.


Start microwin, change mode and than make new project.


What version off microwin you have there and what OS.

Regards,

Marcjan



=== Edited by Marcjan @ 5/21/2012 2:08 PM [GMT ] ===


Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!
Top
  5/21/2012, 2:14 PM
David Stetz
Joined 4/15/2011
Last visit: 5/21/2012
Posts: 2
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

I inadvertantly had two instances of Micro/Win opened.  I was able to change the programming mode after closing the second instance.  Thanks for your help.
Top
Thank you for this post from:
Marcjan
Page 1 of 1 (8 items)
Actions
Copy Link
To conference