Questions - Feedback about FAQs and Online-Support plus Webcasts

SINUMERIK 802d sl pro cylindrical grinding

Thread Starter: Keyan   Started: 11/1/2009 8:56 AM   Replies: 1

  11/1/2009, 8:56 AM

Keyan Joined 10/31/2009 Last visit: 5/29/2012 Posts: 14 Rating:  (0)	(0)  we retrofited studer cylindrical grinding with sinumerik 802d sl pro  . with grinding cycles.machine is running perfectly.but we can't able to set dresser offset. we reg est the dresser position.but  during positioning  the dresser is overtravelling . i filled all required parameters . but during approaching dresser ZERO ,axis is over traveling nearly 9.00mm. but after approach, work coordinate value is ZERO.i am using CYCLE 416 AND CYCLE420 for dressing. i am having major doubt in filling the Z-Reference point (DP4), Because wheel head is tilted to 30 Deg. so if any one knows 802d sl pro cylindrical grinding cycles, kindly help me to make dresser offset and filling required parameters before taking dresser offset.
	Top
	Thank you for this post from: EG. AMMORI

  11/2/2009, 8:58 AM

O_Moderator Joined 4/24/2009 Last visit: 5/19/2013 Posts: 1948 Rating:  (100)	(0)  Thread closed, because question is already published in the thread with the subject 802d sl pro cylindrical grinding. Best regards O_Moderator
	Top