Technical Forum

LOGO!

connecting Siemens Logo! with PC

Thread Starter: split1985 Started: 7/27/2012 3:13 PM Replies: 1

7/27/2012, 3:13 PM

split1985

Joined 7/27/2012

Last visit: 7/27/2012

Posts: 1

Rating:

(0)

luliam wrote:

Hi!

I have a 6ED1 052-1HB00-0BA6 LOGO plc modul, and cable 6ED1 057-1AA01-0BA0.
I am trying connect with PC by cable, but a have a problem with change mode on a 'PC/Card'.
In my Logo menu looks like:

Program..
Card..
Setup..
Start..

Where I could chang on PC<-> Cable? On Menu 'Card..' is only Card connection, I can not find PC<->Cable. Maybe it is something wrong with my LOGO 24RC?

Thanks for all helps.

I have same problem with connecting Siemens Logo! with PC. I have 6ED1 052-1FB00-0BA6 Siemens Logo and 6ED1057-1AA01-0BA0 cable.
When I try to transfer from PC to LOGO I got message:
Please check:
-LOGO in correct mode
-The LOGO PC cable is connected
-Correct interface selected

Interface is selected correct and PC cable is connected, probably is some problem with mode of LOGO. Where do I select that mode? LOGO display is turned off and he isn't connected on supply.
I am first time using LOGO so every help is welcome.

=== Edited by O_Moderator @ 7/30/2012 11:09 AM [GMT ] ===
new subject after splitting from 0BA6 + cable, problem with connect to PC

=== Edited by split1985 @ 7/27/2012 3:28 PM [GMT ] ===

Top

7/27/2012, 5:54 PM

Marcjan

Joined 4/22/2010

Last visit: 5/21/2013

Posts: 3193

Rating:

Rated: Excellent [4.11 out of 5 / rated 295 time(s)].

(295)

Users with special expertise supervising conferences

(0)

Hello,

Is this a joke

The logo needs power to communicate.
It's not powered by the programming cable.
before going further i suggest you have a look at the Manual

regards,

Marcjan

=== Edited by Marcjan @ 7/27/2012 5:57 PM [GMT ] ===

Problem solved?
Please let us know!

Please no technical questions by PM, use the forum!

Top

Thank you for this post from:

realpower_ir

Actions

Copy Link

To conference