SINAMICS

dynamic breaking resistor

Thread Starter: mahendranath reddy   Started: 6/12/2012 10:15 AM   Replies: 1

  6/12/2012, 10:15 AM

mahendranath ... Joined 12/23/2011 Last visit: 5/21/2013 Posts: 4 Rating:  (0)	(0)  what are parameters required for dynamic braking resistor in CU240B-2 IN V/F MODE === Edited by mahendranath reddy @ 6/12/2012 10:16 AM [GMT ] ===
	Top

  6/15/2012, 3:26 AM

Alan S Joined 1/31/2011 Last visit: 1/21/2013 Posts: 15 Rating:  (0)	(0)  There is nothing special that MUST be done.. I would recommend you to disable VDC controller: p1240 = 0.
	Top