Description

Power modules for electronic modules and motor starters

For supplying and monitoring the load voltage and encoder voltage; voltage and/or fuse failures; additional LEDs indicate the status of the voltage and the fuse; different functions ( AC, DC, PROFIsafe) are available.

Terminal modules

For the electrical and mechanical connection of I/O modules and process wiring. Available with screw-type and spring-loaded terminals as well as the Fast Connect insulation-piercing technique.

Electronic modules

For supplying the ET 200S with digital inputs and outputs.

Digital input modules

Digital output modules

Analog input modules

Analoge output modules

IO-Link

The I/O-Link master module offers 4 I/O link channels with master functionality and enables the connection of intelligent IO-Link devices to the ET200S. All IO-Link functions are provided by ET200S to PROFIBUS DP or PROFINET I/O master modules. Simple data handling of IO-Link components is ensured via the configuration tool integrated in STEP 7. Up to 4 sensors, actuators or other IO-Link devices are each connected to a standard cable. In addition to the central parameterization, IO-Link in SIMATIC S7 also enables an expanded diagnostics up to device level.

Relay modules

When connecting actuators like solenoid or hydraulic valves, dc contactors and indicator lights you often need signals with a higher current load. This can be realized by employing relay modules, also in a failsafe variant.

Reserve modules

Reserves one slot for any electronic module. The reserve module has no connection to the terminals of the TM-E terminal module. The TM-E terminal module can therefore by completely wired up and prepared for its future purpose.

Technology modules

For the solution of technological tasks, high-performance function modules are available that perform these tasks largely autonomously and relieve the CPU significantly. Used directly on site; e.g. for counting, measuring and positioning tasks.Parameterization using STEP 7 or GSD file; serial interface.
For details see the navigation item in the right column.

Measuring modules

SIWAREX CS is a compact electronic weighing system with calibration capability for the distributed I/O system SIMATIC ET 200S. The SIWAREX CS weighing module can be used for various different measuring tasks such as container weighing, fill-level measurement, platform weighing, crane weighing as well as the measuring of forces and torques.

SIWAREX CF is a measuring module for connection of sensors operating according to the strain gauge principle. The module can be used for various tasks, e.g. for measuring forces and torques..