Print document

Technical Forum

Process Control Systems SIMATIC PCS 7

Unknown Object During OS Runtime

Thread Starter: Hassan Hameed   Started: 8/11/2012 7:27 AM   Replies: 3

« Previous thread Next thread »
Page 1 of 1 (4 items)
  8/11/2012, 7:27 AM
Hassan Hameed
Joined 1/14/2012
Last visit: 1/3/2013
Posts: 2
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hey everyone, recently i created a an analog input scaling faceplate using CFC charts. During runtime i faced illogical error on faceplate of unknown object . Please see the attached file & recommend a better solution

Attachment: FacePlate.pdf  (8 Downloads)
Top
  8/12/2012, 6:30 AM
Tagolover
Joined 9/6/2008
Last visit: 6/8/2013
Posts: 987
Rating:
Rated: Outstanding [3.84 out of 5 / rated 55 time(s)]. (55) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi

Well it seems that you have an missing picture or emf file, have you used any .emf file or .bmp file on the status display or extended status display.

If yes then you will have to copy the picture or image file to the WinCC project your using in the GRACS folder. and press referesh and it will be ok.

Have fun...Rnf:lblSmileyTooltip_
TAGOLOVER
Top
  8/14/2012, 12:49 AM
Hassan Hameed
Joined 1/14/2012
Last visit: 1/3/2013
Posts: 2
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi,
     I didn't used any picture for it, just created a faceplate using CFC. And in CFC I added Analog input block from the library, please suggest a solution for this.

Thanks.
Top
  8/14/2012, 4:26 AM
winarko
Joined 6/7/2012
Last visit: 2/11/2013
Posts: 44
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hello,

Is it a Single Station project? If yes you must changed the computer name in WinCC Explorer to match your computer name.

If the problem still occur you may use OS Project Editor and then click OK,it will reorganize your picture again..

Regards..
Top
Page 1 of 1 (4 items)
Actions
Copy Link
To conference