Decentral Peripherie

S7-1200 with Profibus and required OBs

Thread Starter: Nikzitronik   Started: 5/17/2012 4:07 PM   Replies: 3

  5/17/2012, 4:07 PM

Nikzitronik Joined 3/5/2010 Last visit: 5/12/2013 Posts: 97 Rating:  (2)	(0)  Dear all, What are the required OBs so that the cpu does not stop when a Profibus-DP slave fails. Regards
	Top

  5/17/2012, 4:27 PM

Ganes10 Joined 8/31/2010 Last visit: 5/18/2013 Posts: 1253 Rating:  (104)	(0)  Nikzitronik wrote: Dear all, What are the required OBs so that the cpu does not stop when a Profibus-DP slave fails. Regards Hello Nikzitronik, Check this FAQ under S7-1200 categories - Which organization blocks can you use in STEP 7 V11? Like it? Rate it!
	Top
	Thank you for this post from: Prats

  5/17/2012, 6:08 PM

huggy_d1 Joined 7/7/2010 Last visit: 5/17/2013 Posts: 1977 Rating:  (200)	(0)  Nikzitronik wrote: Dear all, What are the required OBs so that the cpu does not stop when a Profibus-DP slave fails. Regards What PLC firmware and what TIA Portal version are you using? The simple answer is the diagnostic error interrupt OB.  You can have just one of these per PLC.  It allows you to handle errors within the plc. Please post your results. Helpful? Rate it. Solved? Post it.
	Top

  5/18/2012, 1:41 PM

Nikzitronik Joined 3/5/2010 Last visit: 5/12/2013 Posts: 97 Rating:  (2)	(0)  Firmware version is 2.2 and TIA portal V11. Regards
	Top