SIMATIC Panel

About Screen

Thread Starter: freeman1907   Started: 6/22/2012 10:05 AM   Replies: 9

  6/22/2012, 10:05 AM

freeman1907 Joined 2/22/2012 Last visit: 8/14/2012 Posts: 28 Rating:  (0)	(0)  Hi All I would like to controll my hmi screen from s7 1200 plc is there any chance to do this, if yes how?? For example at hmi, you click F1 and screen goes to "setting screen" and in setting screen you click F2 screen goes setting screen 2,3,4..etc.. With Kind Regards === Edited by freeman1907 @ 6/22/2012 10:05 AM [GMT ] ===
	Top

  6/22/2012, 10:13 AM

Marcjan Joined 4/22/2010 Last visit: 5/18/2013 Posts: 3190 Rating:  (295)	(0)  Hello, Please tell us what screen you have there, most screens have option to select screen with PLC. To be sure whe need the MLFB off the screen. Regards, Marcjan Problem solved? Please let us know! Please no technical questions by PM, use the forum!
	Top

  6/22/2012, 10:36 AM

freeman1907 Joined 2/22/2012 Last visit: 8/14/2012 Posts: 28 Rating:  (0)	(0)  Hiii Is it important what screens ı have?? cause I haven't determine yet. With Best Regards
	Top

  6/22/2012, 11:39 AM

fbelic Joined 2/17/2009 Last visit: 5/17/2013 Posts: 320 Rating:  (25)	(0)  Greetings "you click F1 and screen goes to "setting screen" and in setting screen you click F2 screen goes setting screen 2,3,4..etc" How is that control from PLC? You can do all this without PLC, just with HMI. This is the usual way... Best regards
	Top

  6/22/2012, 11:41 AM

Marcjan Joined 4/22/2010 Last visit: 5/18/2013 Posts: 3190 Rating:  (295)	(0)  freeman1907 wrote: Hiii Is it important what screens ı have?? cause I haven't determine yet. With Best Regards Not the screens but the ordernumber of the HMI itself, different hmi is different options and solutions. Regards, Marcjan Problem solved? Please let us know! Please no technical questions by PM, use the forum!
	Top

  6/22/2012, 11:56 AM

freeman1907 Joined 2/22/2012 Last visit: 8/14/2012 Posts: 28 Rating:  (0)	(0)  Hii Ok i understood,... My hmi is KTP 600 BASİC PN  order number: 6AV6647-0AD11-3AX0 With Kind Regards
	Top

  6/22/2012, 12:04 PM

freeman1907 Joined 2/22/2012 Last visit: 8/14/2012 Posts: 28 Rating:  (0)	(0)  Hii You can do that with hmi, but i heard that you can also do with plc,i dont know also how??? and it is more flexible and short.. So i asked for it if somebody helps me??  With Kind Regards
	Top

  6/22/2012, 12:13 PM

Marcjan Joined 4/22/2010 Last visit: 5/18/2013 Posts: 3190 Rating:  (295)	(0)  Hello, You don't need to use PLC to change screens as mentioned above. Simply add the correct function to the F-keys. See picture attached. Regards, Marcjan Attachment: screenchange.JPG  (11 Downloads) Problem solved? Please let us know! Please no technical questions by PM, use the forum!
	Top

  6/22/2012, 12:34 PM

Wizard Joined 4/24/2006 Last visit: 5/17/2013 Posts: 4670 Rating:  (428)	(0)  Hello freeman1907, It is possible to change screen by using the F-buttons of panel, like already mentioned. But it is also possible to change screen by using PLC. You can use a tag1. Go to properties -> Events and use "Value change" -> Activate Screen by number. And then you can use a Tag to specify the screen you want to select. Best regards, Wizard
	Top

  6/22/2012, 1:12 PM

freeman1907 Joined 2/22/2012 Last visit: 8/14/2012 Posts: 28 Rating:  (0)	(0)  Hi all Thank You very much it is resolved With Best Regards
	Top
	Thank you for this post from: Marcjan, Wizard